Inconel 600 601 625 718 X750 Bar/Rod For Corrosion Resistant Structural Materials
Inconel 600 alloy is a nickel-chromium-iron-based solid solution strengthened alloy with good high temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding properties, and has satisfactory thermal strength and high plasticity below 700 ℃. Inconel 600 material is the most commonly used material in structural engineering because it is well suited for high temperatures above 1000°F (540°C). Inconel 600 is durable, stable, strong and corrosion resistant. Inconel 600 is also known as a superalloy due to its strong properties, such as its excellent performance under enormous mechanical stress and temperature, and its resistance to oxidation and creep. Inconel 600 (UNS N06600) is also used in parts and accessories for heat treatment furnaces, heat exchangers, etc.
Inconel 625 is an alloy grade with a density of 8.4 g/cm3 and a melting point of 1290-1350 °C. It has excellent corrosion resistance to inorganic acids, and has excellent corrosion resistance to various corrosive media in oxidative and reducing environments. The softened and annealed low carbon alloy 625 is widely used in the chemical process industry, and its better corrosion resistance and high strength enable it to be used as a thinner structural component.
Inconel 718 (N07718) is an iron-nickel-chromium-based precipitation hardening deformed superalloy. The long-term service temperature range is -253 ~ 650°C, and the short-term service temperature is 800°C. It has high strength and good toughness below 650°C. The unique formulation of Inconel 718 increases strength and corrosion resistance while providing easy machinability and ease of weldability. Inconel 718 alloy has been used to manufacture rings, blades, standard parts and structural parts in the aerospace, aerospace and energy industries. Inconel 725 is a nickel-chromium-molybdenum-niobium alloy with excellent corrosion resistance. After aging heat treatment, the strength of the alloy can be greatly increased, and the ductility and tensile strength of the alloy can be greatly improved. The alloy also has strong resistance to stress corrosion, and is mainly used in pipe fittings, joints and bearings in acid-resistant equipment, and is also widely used in marine equipment.
Inconel X-750 alloy is mainly a nickel-based superalloy that is age-strengthened with γ" phase. It has good corrosion resistance and oxidation resistance below 980 °C, high strength below 800 °C, and good corrosion resistance below 540 °C. Relaxation resistance, good formability and welding performance. The alloy is mainly used to manufacture flat springs and coil springs that are resistant to relaxation and require high strength for aero-engines that work below 800 °C. It can also be used to manufacture turbine blades And other parts. The varieties that can be supplied are plate, strip, bar, forging, ring, wire and pipe.
| Product Name | Inconel 600 601 625 718 X750 Bar/Rod For Corrosion Resistant Structural Materials |
| Type: | Bar/Rod |
| Outer Diameter | 10-600mm (3/8"-25") |
| Length | 3000mm, 5800mm, 6000mm,12000mm,etc |
| Standard | ASTM,JIS, AISI, GB, DIN, EN |
| Surface | BA,2B,NO.1,NO.4,HL |
| Application | It is widely used in high-temperature and electric industry, medical devices, construction, chemistry, food industry, agriculture, and ship components. |
| It also applies to food and beverage packaging, kitchen supplies, trains, aircraft, conveyor belts, vehicles, bolts, nuts, springs, and screen mesh etc. |
| Certification | ISO, SGS, BV |
| Technique | Cold Rolled /Hot Rolled/ Casting |
| Edge | Mill Edge/Slit Edge |
| Grade (ASTM UNS) | N08020,INCOLOY Alloy 20, N08028,INCOLOY Alloy 28, N08330,INCOLOY, Alloy 330, N08800, INCOLOY Alloy 800, N08810, INCOLOY Alloy 800H, N08825, INCOLOY Alloy 825, N06600, Inconel 600, N06601, Inconel 601, N06625, Inconel 625, INCOLOY Alloy 625, N07718, Inconel 718,INCOLOY Alloy 718,N07750,Inconel X750,N04400,MONEL400, Nickl200, S66286, N10276, Hastelloy C-276, N06455, Hastelloy C-4,N06022,Hastelloy C-22,N10665,Hastelloy B-2,N10675, Hastelloy B-3, N06030, Hastelloy G-30, INCOLOY Alloy A286, N08926, INCOLOY Alloy 25-6Mo etc. |
| Grade (EN) | 2.4060 1.4980 1.4529 2.4460 1.4563 1.4886 1.4876 1.4876 2.4858,2.4816 2.4851 2.4856 2.4856 2.4668 2.4669 2.4360 2.4375 2.4819 2.4610 2.4602 2.4617 2.4660 etc. |
| Packaging Details | In bundle,plastic bags,thin film,wooden pallet,standard seaworthy export packing or as customer demands |
| Container Dimension | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM |
| 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM |
| 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM |
Chemical Composition
| Grade | Ni,Min | Cu | Mo | Mn | C | Si | S | Cr | Al | Ti | V | Nb |
| UNS N02200 | 99.0 | 0.25 | - | 0.35 | 0.15 | 0.35 | 0.001 | - | - | - | - | - |
N04400
(Monel400) | 63.0 | 28.0-34.0 | - | 2.00 | 0.30 | 0.50 | 0.024 | - | - | - | - | - |
UNS N06600
(Inconel600) | 72.0 | 0.50 | - | 1.00 | 0.15 | 0.50 | 0.015 | 14.0-17.0 | - | - | - | - |
UNS N06601
(Inconel601) | 58.0-63.0 | 1.00 | - | 1.00 | 0.10 | 0.50 | 0.015 | 21.0-25.0 | 1.0-1.7 | - | - | - |
UNS N06625
(Inconel625) | 58.0 | - | 8.0-10.0 | 0.5 | 0.10 | 0.50 | 0.015 | 20.0-23.0 | 0.40 | 0.40 | - | Nb+Ta:3.15-4.15 |
UNS N06690
(Inconel690) | 58.0 | 0.50 | - | 0.5 | 0.50 | 0.50 | 0.015 | 27.0-31.0 | - | - | - | - |
UNS N08020
(Alloy 20) | 32.0-38.0 | 3.0-4.0 | 2.0-3.0 | 2.0 | 0.07 | 1.00 | 0.035 | 19.0-21.0 | - | - | - | Nb+Ta:8xC-1.00 |
UNS N08028
(Alloy 28) | 30.0-34.0 | 0.6-1.4 | 3.0-4.0 | 2.5 | 0.03 | 1.00 | 0.030 | 26.0-28.0 | - | - | - | - |
UNS N08800
(Incoloy800) | 30.0-35.0 | 0.75 | - | 1.5 | 0.10 | 1.00 | 0.015 | 19.0-23.0 | 0.15-0.60 | 0.15-0.60 | - | - |
UNS N08810
(Incoloy800H) | 30.0-35.0 | 0.75 | - | 1.5 | 0.05-0.10 | 1.00 | 0.015 | 19.0-23.0 | 0.15-0.60 | 0.15-0.60 | - | - |
UNS N08811
(Incoloy800HT) | 30.0-35.0 | 0.75 | - | 1.5 | 0.06-0.10 | 1.00 | 0.015 | 19.0-23.0 | 0.15-0.60 | 0.15-0.60 | - | - |
UNS N08825
(Incoloy825) | 38.0-46.0 | 1.5-3.0 | 2.5-3.5 | 1.0 | 0.05 | 0.50 | 0.030 | 19.5-23.5 | 0.20 | 0.6-1.2 | - | - |
UNS N06022
(Hastelloy C-22) | Surplus | - | 12.5-14.5 | 0.5 | 0.015 | 0.08 | 0.020 | 20.0-22.5 | - | - | 0.35 | - |
UNS N10276
(Hastelloy C-276) | Surplus | - | 15.0-17.0 | 1.0 | 0.01 | 0.08 | 0.030 | 14.5-16.5 | - | - | - | - |
UNS N10665
(Hastelloy B-2) | Surplus | - | 26.0-30.0 | 1.0 | 0.02 | 0.10 | 0.030 | 1.00 | - | - | - | - |
UNS N10673
(Hastelloy B-3) | 65.0 | - | 27.0-32.0 | 3.0 | 0.01 | 0.10 | 0.010 | 1.0-3.0 | - | - | 0.20 | 0.02 |
Mechanical Properties
| Grade | Tensile Strength | Yield Strength | Ductility | HRB |
| UNS N02200 | | | | |
| Anneales | 379 | 103 | 40 | - |
| Stress-relieved | 448 | 276 | 15 | B65 |
| N04400(Monel400) | |
| Anneales | 483 | 193 | 35 | - |
| Stress-relieved | 586 | 378 | 15 | B65 |
| UNS N06600(Inconel600) | 552 | 241 | 30 | - |
| UNS N06601(Inconel601) | 552 | 207 | 30 | - |
| UNS N06625(Inconel625) | |
| Gr.1 | 827 | 414 | 30 | - |
| Gr.2 | 690 | 276 | 30 | - |
| UNS N06690(Inconel690) | 586 | 241 | 30 | - |
| UNS N08020(Alloy 20) | 551 | 241 | 30 | - |
| UNS N08028(Alloy 28) | 500 | 214 | 40 | - |
| UNS N08800(Incoloy800) | |
| Annealed | 518 | 207 | 30 | - |
| Cold-Worked | 572 | 324 | 30 | - |
| UNS N08810(Incoloy800H) | 448 | 172 | 30 | - |
| UNS N08811(Incoloy800HT) | 448 | 172 | 30 | - |
| UNS N08825(Incoloy825) | 241 | 586 | 30 | - |
| UNS N06022(Hastelloy C-22) | 690 | 310 | 45 | - |
| UNS N10276(Hastelloy C-276) | 690 | 283 | 40 | - |
| UNS N10665(Hastelloy B-2) | 760 | 350 | 40 | - |
| UNS N10673(Hastelloy B-3) | 760 | 350 | 40 | - |
Detail Photos
Certification
Packing & Shipping
FAQ
Q1: ARE YOU FACTORY OR TRADER?
A1: Our company is a cold rolling manufacturer of magnetic stainless steel coil since 2009. We've gained our Export Right and become an integrated company of industry and trade in order to satisfy buyer's multi-request on different material and products.
Q2: WHICH MATERIAL/PRODUCTS YOU CAN PROVIDE?
A2: Stainless Steel Coils / Strips, Stainless Steel Sheets / Plates, Stainless Steel Circles / Discs, Decorative Stainless Steel Sheets.
Q3: HOW TO GET A SAMPLE?
A3: FREE samples are available for your checking and testing. And to get free samples, you need to send us you detailed receiving address (including post code) and your DHL/FedEx/UPS account for collecting samples, courier cost will be paid in your side.
Q4: HOW TO VISIT YOUR FACTORY?
A4: Most of the main cities have flights to Wuxi; you can take flight to Wuxi Shuofang International Airport.
If you come from Shanghai, it will take 2 hours by flight (every day 5 flights).
If you come from Hongkong, it will take 1 hour by flight (every day 1 flight around noon time).
Product Tags:
|
|
High Temperature Inconel Bar Rod 600mm Corrosion Resistant Structural Materials Images
|
